Home / News / Installation Guide For Outdoor Post Cap Lights

Installation Guide For Outdoor Post Cap Lights

Update:28 Jun

Installation guide for Outdoor Post Cap Lights :

1. Take out the inner flange at the bottom of the column head lamp from the lamp body, and then fix the expansion screw at the installation position through the middle space of the flange.

2. Fix the inner flange at the installation position, and then connect the lamp head wire in the post lamp with the main cable and wrap it firmly with waterproof insulation to ensure that it does not fall off and leak electricity.

3. Install the column head light source in the lamp holder and tighten the light source. If the test can be powered on, the test can be powered on and then proceed to the next step.

4. Make sure that after installing the light source and wiring, cover the lamp body of the post lamp on the inner flange and fix the surrounding screws firmly.

5. The installation of the post lamp is completed, and the overall power-on test ensures that each post lamp lights up normally.