Wholesale Solar Garden Lights Manufacturers Introduce The Relevant Knowledge Of Street Light Accessories

Wholesale Solar Garden Lights Manufacturers introduces the packaging instructions of solar street light accessories

1. Solar panel packaging method
   ①Padded plastic corners between each module, and then use a 5-layer corrugated paper cover and 7-layer corrugated paper periphery. Install a rigid paper column around the module. A piece of wood or a board should be placed between the top module and the roof. For thick foam plastics, use packing tape to tie the package at the end. Pay attention to the corners of hard paper between the packing tape and the package. Wrap a layer of plastic wrap on the outermost layer.
   ②Using a small packing box, each containing two components, there are hard paper isolation and corner protection between the components. Use packing tape and plastic wrap.
2. LED light packaging method
   ① Pressure-proof, the outer packaging must be strong and able to withstand a certain pressure, such as wooden frame packaging

②Anti-vibration, there must be isolation between the lamp and the lamp, such as bubble bag wrapping

③Anti-drop, there must be isolation between the inner packaging and the outer packaging, such as separated by pearl cotton

3. Battery packaging method
   The storage battery is small in size and heavy individually. Pay attention to cover the positive and negative poles with insulating sheets when packing to prevent short circuits. It is best to pack them in wooden boxes for easy loading and unloading.
4. Packaging of accessories
   Point out the quantity of angle valves, screws, solar controllers, brackets, cables, etc., and make a list of accessories to prevent insufficient quantities on site.
5. Fixing of street light pole
   The street light poles are large in size and should be fixed well. Some protective films should be packed between each pole to prevent the poles from rubbing against each other and causing scratches on the poles.